Features

• Wide Frequency Range: 0.01 µHz to 30M Hz
• Various Types of Output Waveforms: Equipped with standard, arbitrary and “parameter-variable” waveforms.
• Useful Programming Function: The sequence function enables you to easily program output patterns.
• Wide Array of Oscillation Modes: Continuous, burst/trigger/gate, internal/external modulation, sweep, and sequence oscillation
• 2-channel Mode: Two independent channels, two phases, constant frequency difference, constant frequency ratio, and differential output
• Function: Synchronous operation of multiple units, usable as a pulse generator, external addition input, user-defined units, and more
• Pursuit of Usability: Flat and lightweight (88 mm high, 2.1 kg), each channel insulated from the housing, USB/GPIB interface, and more

Feature

• Gain accuracy ±0.05Db, Phase accuracy ±0.3˚
• Dynamic range more than 140dB
• Measurement frequency FRA5097 : 0.1MHz to 15 MHz
• Isolation Voltage 250 Vrms
• Bode plot, Nyquist plot, Nichols plot and Cole-Cole plot output are available
• Auto integration, amplitude condensation, arithmetic function
• Color LCD display & USB
• Built-in printer
• Software for reading data files

• Output control employing our unique hybrid power control technology
• User interface designed to take into account how each customer uses the equipment
• Energy-saving design to efficiently supply power and improve equipment operability

• Single-phase 2 kVA to 20 kVA, Three-phase 6 kVA to 60 kVA. Single-/Three-phase switchable*.
• AC output voltage: 0 to 150 V/0 to 300 V, Frequency: 5 Hz to 1100 Hz, DC output voltage: 0 to + 203 V/0 to + 406 V
• Component style allows expansion after being introduced. Cabinet style is compact and requires small installation space.
• Voltage dips, voltage variations, simultaneous sweeping of frequency and voltage.
• Equipped with measurement function, protective circuit, remote sensing, and AGC function. External input* available and peak current of 3.5 times of maximum rms value can be supplied.
• Software (Immunity Test Software 2010 ES0406C*) that performs low frequency immunity test of IEC standard is available.
• Performs power source harmonic measurement and various simulations. Furthermore, it can be used as CVCF for anechoic chamber or production line.

(*optional products or products sold separately.)

• Basic accuracy: 0.08%, display resolution of 6 digits (max.)
• Measurement speed: Max. 2ms at 1 kHz
• Measurement frequency: 1 mHz to 100 kHz, 5-digit resolution
• Measurement signal level: Max. 5 Vrms, 3-digit resolution
• Measurements parameters: Lp, Ls, Cp, Cs, Rp, Rs, |Z|, |Y|, G, Q, D, Ѳ, X, B, Rdc
• Constant-voltage/constant-current drive (ALC:Auto Level Control)
• Internal DC bias: 0 V to +2.50 V
• DC resistance measurement
• 4-terminal contact check function and a handler interface for production lines (ZM2372)
• Application software

Features

• High stability based on digital processing
• Phase stability 0.01˚ /˚C, Gain stability ±100ppm/˚C
• Measurement from 1mHz
• Low speed signal analysis is available like infrared spectrum, temperature response etc.
• High speed and smooth response. Minimum time constant 10µs, synchronized filter provided and quick response to setting change.
• Simple and assured operation to sophisticated measurement: Auto function, key allocation, large indicating window, analog meters and modify dial are provided.
• Two models lined up:
  • Fulfilled multi-function digital lock-in amplifier : LI5640
  • Simplified and cost-performance : LI5630

• Computer interface (GPIB, RS232C)
• Automatic functions: AUTO SET, AUTO RANGE, AUTO NORMALIZE, PHASE SET
• High dynamic reserve (110dB Max.)

• Wide bandwidth: DC to 10MHz
• High gain: 10 to 1000
• Differential input (single-ended configuration also selectable)
• High CMRR: 120dB or higher
• High common mode voltage: ± 10V
• Low noise: 4nV/√Hz.typ. (1kHz)

• Built-in 255-step sequential signal source
• Voltage/Current output for four quadrants
• High power: ±60V (Can be shifted)
  • BP4610: ±10A (30Ap-p)
  • BP4620: ±20A (60Ap-p)
• High speed: DC to 150kHz (CV)
• Constant voltage (CV) / Constant current (CC) operation selectable
• Response calibration function
• Voltage/Current limiter, measurement display function
• USB interface and external analogue input
• Available for Sequence Editing Software

• Broadband: BA4825 DC to 2MHz, BA4850 DC to 50MHz
• High-power output voltage: BA4825 100Vrms (300Vp-p), 0.5Arms BA4850 ±20V, ±1A
• High slew rate
• Low output impedance
• Bipolar output:Four-quadrant operation that enables positive and negative voltage and current to be supplied (source) and absorbed (sink)
• Multiple functions: Output polarity switching, output range shift, output monitoring, external output on/off control, DC bias addition and offset adjustment

• Wide cutoff frequency
• Various filter modes
• Cutoff frequency selectable (3-1/2 digit resolution)
• X1, X2, X5, selectable passband gain at both input and output
• Single-ended or floating input (selectable)
• Low distortion about 0.02% (*1) and low noise about 100µVrms (*2)

(*1) typ. value for 5kHz or lower of input frequency for 3624/3625
(*2) for 3624 and 3625 (BW = 100kHz)

• 2-digit setting of cutoff frequency
• Selectable frequency response
• 0dB or 20dB selectable passband gain
• Low cost

• Variable cut-off frequency: 1MHz to 100MHz. Max flat/phase linear switch
• Roll-off : 48dB/oct
• Group delay ripple : 10ns or less
• Available for Highpass filter 10Hz to 100kHz

The MS series is suitable for pre-processing analog signals. The plug-in units of filters, differential amplifiers, isolation amplifiers, etc. can be installed into their frames. (16 channels at maximum/the JIS rack size)